|
About Us |
|
News |
|
Products |
|
Contact Us |
|
Tectron Engineering Company |
|
Precise, Reliable, Easy to Operate |
|
Home |
|
About Us |
|
News |
|
Products |
|
Contact Us |
|
Here you can find a list of our standard products. To find out more information on a particular product, please click on the product photograph. |
|
The digital Model 100 detector has an economical design for applications requiring detection of bucket teeth and other large pieces of metal. The model 100 is pre-fabricated to fit CEMA standard conveyors in belt widths up to 48”, and the aperture can be field adjusted to handle most standard application requirements. The model 100 replaces the analog model T2000 detector sold for many years. |
|
The digital Model 50 detector is the most commonly used detector in our product line. The combination of high sensitivity and flexibility make the model 50 ideal for a wide variety of applications. The model 50 can be tuned to ignore conductive and even magnetic ores such as pyrite and magnetite, even if they are carried by high tension steel cord belts with rip detection loops, and is still able to detect small pieces of metal. The model 50 is available in nearly any belt width, and can be field adjusted to fit most standard conveyor configurations. The model 50 replaces the models 5000, 8000, and 8600 detectors sold for many years |
|
The model 5500 E1 metal detector is engineered to be the most sensitive detector on the market for installation on conveyor belts carrying coal, minerals, aggregates and other bulk materials. The model 5500 E1 can be tuned to ignore conductive ores such as gold, copper or zinc while still detecting small pieces of tramp metal. The model 5500 E1 is available in nearly any belt width, and is factory customized to fit your conveyor. The modular design makes the model 5500 E1 easy to install without the use of special tools or the need to cut the belt, while the field replaceable electronics are easy to operate and maintain. With thousands of units installed worldwide, the model 5500 E1 has proven to be reliable and durable. |
|
The model 5500 E6 is engineered to be the most sensitive pulse induction metal detector available. The 5500 E6 is typically used in food, glass and plastic recycling, wood chips, and pulp paper applications which demand the highest possible sensitivity while remaining immune to moisture, salt and other product effects. The 5500 E6 can be built to nearly any belt width and is factory customized to fit your conveyor. The modular design makes the 5500 E6 easy to install without the use of special tools, or the need to cut the belt, while the field replaceable electronics are easy to operate and maintain. The 5500 E6 is the model of choice for applications requiring the highest sensitivity and trouble free operation. |
|
Has the unique ability to detect and discriminate between nonmagnetic and magnetic tramp metals. Typically, the Model 8050 is installed on a conveyor system in conjunction with a magnetic separator. The detector can be set to detect all nonmagnetic tramp metals and those pieces of magnetic tramp metal, which are too large for or missed by the magnet. |
|
Designed to prevent conveyor belt piercing by long rods (such as roof bolts) or jamming of the transfer point, the Model 6000 selectively detects long metal objects of a given diameter and length as well as normal tramp metals greater than the given rod diameter. As with most Tectron units, the detector is also compatible with fabric or steel cord conveyor belts, and belts with metal splices. |
|
Product List |
To contact us call:+1 904-394-0683 |
|
Specialty Detectors |
|
The same rugged design and flexibility of the model 50, but in a detector that fits entirely underneath the belt. Used in applications with low burden depths, below 6” (150mm) recommended, or applications where the metal contamination is always positioned very close to the surface of the belt. The simple design is easy to install and can be customized to fit the conveyor. |
|
The Model 9100 is designed for applications where large sensing apertures and high metal sensitivity are required. It is particularly suited to scanning whole logs on conveyors or chutes. The Model 9100 has shielded receiver and transmitter antennae to minimize interference from surrounding metal and airborne electrical transmissions. |
|
The Road Scan metal detector was designed to allow contractors to scan for metallic objects buried beneath asphalt to help protect cold planers, and more accurately bid road re-paving projects. The Road Scan is able to scan across a full lane width, and detect large metallic objects (manhole covers, water main covers, rail & trolley tracks) to up to 12” deep. |
